Compact Track Loader Tracks
Compact track loaders put a lot of hours on their undercarriage, and the rubber track is one of the highest-wear, highest-cost components on the machine — which makes getting the right fit and lug pattern the first time worth the extra few minutes of checking. Tires4That stocks CTL rubber tracks in the sizing and lug patterns that match popular skid steer and CTL models, from turf-friendly patterns to aggressive multi-bar tread built for daily jobsite work.
What To Look For In Compact Track Loader Tracks
Carrier tracks are measured by three numbers — width, pitch, and link count (for example, 180x60x37) — and all three need to match your machine's OEM specification for the track to fit and tension correctly. Because carriers are built to haul loaded material, load capacity and lug pattern matter more here than on much of the other tracked equipment; a track undersized for the machine's rated payload will wear faster and can even come off the undercarriage under heavy, uneven loads. Lug pattern affects traction directly: a block or C-pattern lug provides solid grip and stability when the carrier is loaded and moving across soft or uneven ground, while a more open pattern sheds mud and debris better on wet job sites. Rubber compound is another factor worth checking, since carriers often work on rocky or debris-covered ground where cut-and-chip resistance in the rubber compound directly affects track lifespan. If you're replacing a track that failed early, it's also worth checking that the track was rated for the machine's actual operating weight when loaded — undersizing a track to save money upfront is one of the more common reasons carrier tracks fail before their expected wear life.
Frequently Asked Questions
Q: How do I know what size rubber track my compact track loader needs?
A: Check your CTL's spec plate or owner's manual for the OEM track size, listed as width, pitch, and link count (for example, 320x86x52). This needs to match exactly, since even small pitch differences can cause tracking or fit issues.
Q: What's the difference between a multi-bar and turf track for a CTL?
A: A multi-bar (aggressive) lug pattern maximizes traction for general construction, demolition, and earthmoving. A turf track uses a reduced lug pattern to minimize ground disturbance, making it the better choice for landscaping or lawn-sensitive job sites.
Q: Why does my CTL track keep coming off the sprocket?
A: This is often caused by improper track tension, worn rollers or sprockets, or a track that doesn't precisely match the machine's OEM pitch specification. Checking tension and undercarriage wear alongside the track itself usually resolves repeat de-tracking.
Q: How long do compact track loader tracks typically last?
A: Track life varies widely based on ground conditions, daily hours, and maintenance, but proper tension and alignment have a bigger impact on lifespan than most operators expect — even a high-quality track wears prematurely on a poorly maintained undercarriage.
Q: What brands do you carry for carrier rubber tracks?
A: We carry compact track loader tracks made by Rubber Track Solutions in OEM-fit sizing for popular skid steer and CTL models, with both multi-bar and turf lug pattern options available.